A complete and cutting-edge range of products cannot do without an equally complete and functional set of accessories, ensuring maximum flexibility of application and the ability to meet any configurability need during wiring. All QUADRITALIA accessories are developed and studied with the same attention given to the products on which they are installed: the result is a wide range of reliable and easy-to-use products, capable of satisfying any request with innovative solutions.
The Quadritalia product range is flanked and completed by a wide range of accessories.
The plastic parts are made of ABS UL 94-V0 (nylon reinforced with fibreglass), which ensures self-extinguishing properties.
Filter cloths are made of high-performance nonwoven material with progressive structure made of unbreakable, thermobonded synthetic fibres.
Resistant up to 100°C and up to 100% relative humidity, they have a dust storage rating of 650 g/m2. The initial pressure drop is 25 Pa. They can be cleaned by rinsing, water jet treatment or beating.
The quality complies with DIN 24185 standards. Rotation mounts are exclusively ball bearings for high reliability and long life (min. 50,000 hours at 25°C and 65% relative humidity).
Other supply voltages in both AC and DC are available on request.
Standard airflow is of a suction-type (from outside the enclosure to the inside), available on request as the opposite (pressurized) airflow for filter units with fan.
Standard degree of protection is IP 54 (IP 55 or EMC protection are available on request).
Con l’introduzione delle nuove normative sulla sicurezza dei quadri elettrici di bassa tensione nell’industria dell’automazione, progettisti e utilizzatori si stanno orientando sempre di più verso la scelta di componenti di qualità e prodotti certificati.
Da sempre sensibile all’argomento, Quadritalia è stata fra i primi a fornire le più importanti certificazioni di settore.
Interested in completing accessories?
Discover in detail the completing accessories of QUADRITALIA. Download the product catalogue.
QUADRITALIA’s ventilation systems ensure heat dissipation of switchboards in a simple, efficient and practical way. The “FLT ..7” filters and filters with “GFV ..7” fans allows for IP 54/55 protection and, with the introduction of new models, make it possible to meet increasingly demanding requirements.
The plastic parts are made of ABS UL 94-V0 (nylon reinforced with fibreglass), which ensures self-extinguishing properties.
Filter cloths are made of high-performance nonwoven material with progressive structure made of unbreakable, thermobonded synthetic fibres.
Resistant up to 100°C and up to 100% relative humidity, they have a dust storage rating of 650 g/m2. The initial pressure drop is 25 Pa. They can be cleaned by rinsing, water jet treatment or beating.
The quality complies with DIN 24185 standards. Rotation mounts are exclusively ball bearings for high reliability and long life (min. 50,000 hours at 25°C and 65% relative humidity).
Other supply voltages in both AC and DC are available on request.
Standard airflow is of a suction-type (from outside the enclosure to the inside), available on request as the opposite (pressurized) airflow for filter units with fan.
Standard degree of protection is IP 54 (IP 55 or EMC protection are available on request).
Con l’introduzione delle nuove normative sulla sicurezza dei quadri elettrici di bassa tensione nell’industria dell’automazione, progettisti e utilizzatori si stanno orientando sempre di più verso la scelta di componenti di qualità e prodotti certificati.
Da sempre sensibile all’argomento, Quadritalia è stata fra i primi a fornire le più importanti certificazioni di settore.
Interested in ventilations systems?
Learn about the ventilations systems in detail. Download the documentation you may need: the catalogue, data sheets and product certifications.
QUADRITALIA has developed a series of devices to control the temperature of switchboards (when connected to fans and resistors) or for alarm signalling.
TMF 341 thermostat (BLUE) has a normally open contact and can be used for signalling temperature alarms or controlling ventilation systems.
TMF 342 thermostat (RED) has a normally closed contact and can be used for both alarm signalling and control of anti-condensation resistances.
TEM 480 electronic alarm thermostat, to be supplied electrically, has changeover contacts and a very small tripping differential (or hysteresis).
Fanless resistors are equipped with:
• thermoregulated PTC
• anodised aluminum profile
• 2x20AWG section cable with PFA sheathing
• quick snap-on mounting system on DIN-35 EN 500222 rail
Resistors with fan, on the other hand, include, in addition to all components of fanless devices:
• ball-bearing fan for high reliability and long life, UL, CSA and VDE approved
• chromed and nickel-plated metal protection grid
A complete range with over a hundred models guarantees great versatility and a wide range of possibilities of use. The construction precision and quality, derived from the know-how of expert technicians, are the pillars of a product certified by the high construction standards, ideal for any application both indoor and outdoor. The high possibility of customization is an additional plus: in fact, we offer customized solutions, designed specifically for your needs.
Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem. Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem.
Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem. Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem.
Interested in anticondensation thermostats and resistors?
Learn about the anticondensation thermostats and resistors in detail. Download the documentation you may need: the catalogue, data sheets and product certifications.
QUADRITALIA offers a wide range of air conditioning systems for switchboards: wall-mounted, rooftop, air-to-air and air-to-water exchangers.
All air conditioners are equipped with a condenser self-cleaning system that makes it no longer necessary to clean the air filter, eliminating routine maintenance.
For the entire range there are five mounting templates and, from code CS – T/1100
up to 4100, there is a built-in environmentally friendly condensate sink.
A complete range with over a hundred models guarantees great versatility and a wide range of possibilities of use. The construction precision and quality, derived from the know-how of expert technicians, are the pillars of a product certified by the high construction standards, ideal for any application both indoor and outdoor. The high possibility of customization is an additional plus: in fact, we offer customized solutions, designed specifically for your needs.
Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem. Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem.
Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem. Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem.
Interested in air conditioning systems ?
Learn about the air conditioning systems in detail. Download the documentation you may need: the catalogue, data sheets and product certifications.
The modular suspension systems are made up of elements that can be coupled to multivariable technology. The coupling of the various elements allows convenient and easy cable installation, fast system alignment and the the possibility to support medium-light loads (400÷300 N).
They are made of cast aluminum G Al Si 12 and tubular iron connection. The joints are painted with powders of the standard type RAL 7040 (gray) and and RAL 7035 standard powder connection tubes (light grey). The bellows seals are similar in colour to the light grey RAL 7035. The dimensions of the connecting tubular are 60×40 mm with an opening for the grommet of 54x34mm. The circular tubes are ø70 and ø48 mm with cable openings useful respectively ø62 and ø42 mm
All air conditioners are equipped with a condenser self-cleaning system that makes it no longer necessary to clean the air filter, eliminating routine maintenance.
For the entire range there are five mounting templates and, from code CS – T/1100
up to 4100, there is a built-in environmentally friendly condensate sink.
A complete range with over a hundred models guarantees great versatility and a wide range of possibilities of use. The construction precision and quality, derived from the know-how of expert technicians, are the pillars of a product certified by the high construction standards, ideal for any application both indoor and outdoor. The high possibility of customization is an additional plus: in fact, we offer customized solutions, designed specifically for your needs.
Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem. Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem.
Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem. Lorem ipsum dolor sit amet, consectetur adipisci elit, sed do eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem.
Interested in Modular Suspension Systems ?
Learn about the Modular Suspension Systems in detail. Download the catalogue.
Lorem ipsum dolor sit amet, consectetur, sed do eiusmod tempor incidunt ut labore.
QUADRITALIA Srl
Via E. Mattei 6/10 – 36040 Brendola (VI) | Tel. 0444.601.744 – Fax 0444.601.057
VAT number IT01989590243 – Nr. REA VI-198640
info@quadritalia.com
Privacy / Cookies
Siamo online. Sentiamoci in chat.