QUADRITALIA’s series of electrical boxes make up a complete range, featuring a huge variety of models and sizes with varied application options. The construction accuracy and quality of our boxes ensure that you have a certified product and the highest construction standards for any indoor or outdoor application.
The series “ST” of wall mount boxes are made up of pressbent stainless steel sheet and have hidden hinges. The box body has a triple angle along the edge of contact with the door, guaranteeing IP66 degree of protection. The inner mounting plate is made in galvanised steel thick 2.0 mm and is fixed to the box by screws welded on the box body.
Protection:
• IP66, IEC 62208 ; CEI EN 62262
• IK10, IEC 62208 ; CEI EN 62262
• Nema type 4: CSA22.2,941 e 942, UL508a
General features:
• external panel thickness 15/10
• door thickness 20/10
• mounting plate thickness 20/10
A complete range with more than a hundred models guarantees great versatility and a wide range of uses. Construction accuracy and quality, derived from the know-how of experienced technicians, are the pillars of a certified product with high construction standards, ideal for any indoor or outdoor application. The high possibility of customization is an additional plus: in fact, we offer tailor-made solutions, designed ad hoc to suit your needs.
Available versions of the stainless ST series:
• STB inox – single door
• STB inox – double door
• STV inox – single transparent door
• STO inox – outdoor box
• STO inox – “Hygienic Design” version
With the introduction of new regulations on the safety of low-voltage switchgear in the automation industry, designers and users are increasingly moving toward choosing quality components and certified products.
Always sensitive to that subject, QUADRITALIA was among the first to achieve the most important industry certifications.
Interested in ST series?
Learn about the ST series in detail. Download the documentation you may need: the catalogue, data sheets and product certifications.
CD series junction boxes are made of press-folded and welded sheet steel, with a thermoset powder coating.
Two perforated supports for fixing the inner plate are welded into them. The cover closes them by means of four screws with a polyurethane gasket, which ensure sealing on plastic bushings.
Stainless CD series junction boxes are made of AISI 304 stainless steel with a “scotch-brite” finish that is press-folded and welded.
(on request, this product is also available in AISI 316L stainless steel).
Protection:
• IP66, IEC 62208 ; CEI EN 62262
• IK10, IEC 62208 ; CEI EN 62262
• Nema type 4: CSA22.2,941 e 942, UL508a
General features:
• external panel thickness 15/10
• door thickness 20/10
• mounting plate thickness 20/10
A complete range with over a hundred models guarantees great versatility and a wide range of possibilities of use. The construction precision and quality, derived from the know-how of expert technicians, are the pillars of a product certified by the high construction standards, ideal for any application both indoor and outdoor. The high possibility of customization is an additional plus: in fact, we offer customized solutions, designed specifically for your needs.
Code CD inox includes:
• Welded body with inner mounting plate supports
• Screwed cover
• Fixing screws
Additional elements:
• Inner mounting plate
• fast tightening screws 1/4 turn
With the introduction of new regulations on the safety of low-voltage switchgear in the automation industry, designers and users are increasingly moving toward choosing quality components and certified products.
Always sensitive to that subject, QUADRITALIA was among the first to achieve the most important industry certifications.
Interested in CD series?
Learn about the CD series in detail. Download the documentation you may need: the catalogue, data sheets and product certifications.
QUADRITALIA Srl
Via E. Mattei 6/10 – 36040 Brendola (VI) | Tel. 0444.601.744 – Fax 0444.601.057
VAT number IT01989590243 – Nr. REA VI-198640
info@quadritalia.com
Privacy / Cookies
